How do I cut a True Door to size?

Summary

To cut a True Doors decal to the correct size after applying it, follow these steps:

1. Prepare the Tools:

   • Use a sharp Stanley knife.
   • A metal ruler or straight edge is recommended to guide your cuts.
     
     

2. Position the Knife:

   • Hold the knife at a 45-degree angle to the door for better control and precision.
   • Start cutting a little away from the edge of the door rather than right on the edge to reduce the chance of the knife slipping.
     
     

3. Cut Along the Edge:

   • Use the edge of the door as a guide to keep your cuts straight.
   • Slowly slide the ruler down the door while maintaining pressure on it, and cut along the door's edge with the knife.
     
     

4. Cut Holes for Fixtures:

   • If there are door handles, peepholes, or other fixtures, cut holes where needed after the decal is applied.
   • Ensure the cuts are clean, and replace the fixtures once finished.
     
     

5. Trim the Top and Bottom:

   • Remember to trim both the top and bottom edges of the decal to ensure a neat finish.

By cutting carefully and methodically, you can achieve a clean, professional look for your True Doors decal​.